Vitara JS (2Dr) 2WD L4-1.6L DOHC MFI (1999)
3) Install front wheel bearing
NOTE:
^
As front wheel bearing is cassette type double taper roller bearing, it must be replaced as whole unit when replacement becomes necessary.
^
Cassette type double taper roller bearing is so designed as to provide proper pre-load as long as it is tightened to specified torque. Therefore, it
requires no pre-load check after installation, unlike conventional taper roller bearing.
^
Apply wheel bearing grease between bearings.
"A": Grease 99000-25010
4) Install bearing circlip.
5) Drive in oil seals by using special tools.
Special Tool
(F): 09944-66010
(G): 09924-74510
6) Apply lithium grease to lip portion and hollow of oil seal.
NOTE: Amount of grease applied to hollow in oil seal should be more than 60% of its vacant space.
"A": Grease 99000-25010