Vitara JS (2Dr) 2WD L4-1.6L DOHC MFI (1999)
_2wd/l4-1.6l_dohc_mfi/Page-800002.png)
2. Check resistance between two terminals of EVAP canister purge valve.
Resistance of EVAP canister purge valve:
28 - 35 Ohm at 20 °C (68 °F)
If resistance is as specified, proceed to next operation check. If not, replace.
3. Disconnect vacuum hoses from intake manifold and its EVAP canister.
4. With coupler disconnected, blow into hose "A". Air should not come out of hose "B".
5. Connect 12 V battery to EVAP canister purge valve terminals. In this state, blow hose "A".
Air should come out of hose "B".
WARNING: Do not suck the air through valve. Fuel vapor inside valve is harmful.
If check result is not as described, replace EVAP canister purge valve.
6. Connect vacuum hoses.
7. Connect EVAP canister purge valve coupler securely.
