Vitara JS (2Dr) 2WD L4-1.6L DOHC MFI (1999)
_2wd/l4-1.6l_dohc_mfi/Page-862002.png)
3. Remove IAC valve from throttle body.
Installation
1. Install new O-ring to throttle body.
2. Install IAC valve to throttle body.
Tighten IAC valve screws to specified torque.
Tightening Torque
(a): 3.5 Nm (0.35 kg-m, 2.5 ft. lbs.)
3. Connect IAC valve connector securely.
4. Connect negative cable to battery.
