Testing and Inspection for Ignition Coil in the Vitara JS (2Dr) 2WD L4-16L DOHC MFI (1999)
_2wd/l4-1.6l_dohc_mfi/Page-907001.png)
Ignition Coil: Service and Repair
IGNITION COIL ASSEMBLY (IGNITER AND IGNITION COIL)
REMOVAL
1. Disconnect ignition coil coupler.
2. Disconnect high-tension cord from ignition coil assembly.
3. Remove ignition coil bolt, and then pull out ignition coil assembly.
INSTALLATION
1. Install ignition coil assembly.
2. Tighten ignition coil bolt, and then connect ignition coil coupler.
3. Install high-tension cord to ignition coil assembly while gripping its cap.
