Vitara JS (2Dr) 2WD L4-1.6L DOHC MFI (1999)
Spark Plug: Service and Repair
REMOVAL
1. Pull out high-tension cord while gripping its cap.
2. Remove ignition coil assembly, referring to "Ignition Coil Assembly".See: Ignition System/Ignition Coil
3. Remove spark plug
INSTALLATION
1. Install spark plug and tighten them to specified torque.
Tightening Torque
(a): 25 Nm (2.5 kg-m, 18.0 ft. lbs.)
2. Install ignition coil assembly, referring to "Ignition Coil Assembly".
3. Install high-tension cord while gripping its cap.