Vitara JS (2Dr) 2WD L4-1.6L DOHC MFI (1999)
1. Check that none of following faulty conditions exists.
^
Bend, scratch, deformity in vehicle body mounted on SDM
^
Foreign matter or rust on mating surface of vehicle body mounted on SDM
2. Install SDM to vehicle.
CAUTION: Ensure that arrow on the SDM is pointing toward the front of the vehicle.
3. Tighten SDM bolts to specified torque.
Tightening Torque
(a): 6 Nm (0.6 kg.m, 4.5 ft. lbs.)
4. Connect SDM connector to SDM securely.
^
Push in connector lock lever with inserting SDM connector to SDM securely.
^
Install connector lock pin to SDM connector.
5. Install tuner assembly, clock assembly, tuner pocket, radio hole cover, etc. and ashtray.
6. Install center garnish panel.