Vitara JS (2Dr) 2WD L4-1.6L DOHC MFI (1999)
_2wd/l4-1.6l_dohc_mfi/Page-1198011.png)
11. Install rectifier.
CAUTION: When installing rectifier, check to confirm that stator leads have enough clearance with cooling fan blades.
Tightening Torque
(a): 2.0 Nm (0.2 kg.m, 1.5 ft. lbs.)
(b): 3.9 Nm (0.39 kg.m, 3.0 ft. lbs.)
12. Install brush holder cover to brush holder.
13. Place the IC regulator together with the brush holder horizontally on the rear end frame.
14. Install the 5 screws until there is a clearance of approx. 1 mm (0.04 in) between the brush holder and connector.
Tightening Torque (a): 2.0 Nm (0.2 kg.m, 1.5 ft. lbs.)
15. Install rear end cover and terminal plate.
