suzuki Workshop Repair Guides

Suzuki Workshop Service and Repair Manuals

Dismounting and Remounting|Page 4130 > < Symptom Related Diagnostic Procedures|Page 4127
Page 1
background image

Starter Motor: Service and Repair
Dismounting and Remounting

Use following procedure to remove starter:

1. Disconnect negative battery lead at battery.
2. Disconnect magnetic switch lead wire and battery cable from starting motor terminals.
3. Remove two starting motor mount bolts.
4. Remove starting motor.
5. To install, reverse the above procedure.

Dismounting and Remounting|Page 4130 > < Symptom Related Diagnostic Procedures|Page 4127