Vitara JS (2Dr) 2WD L4-1.6L DOHC MFI (1999)
_2wd/l4-1.6l_dohc_mfi/Page-1208004.png)
11. Remove brush springs and brushes.
12. Remove rear bracket cap, and then remove rear bush, as required.
REASSEMBLY
CAUTION: New oilness bearing have been lubricated when they are supplied as spare parts. DO NOT wash with grease dissolving solvent nor
lubricate them with other lubricant.
1. Inspect component parts and replace with new ones as necessary.
2. Apply grease.
3. Install armature to yoke.
4. Install brushes and brush springs to brush holder.
5. Install brush holder to armature while pushing 4 brushes outward.
