Vitara JS (2Dr) 2WD L4-1.6L DOHC MFI (1999)
3) Install control arm to chassis.
Tighten suspension arm nut to specified torque after lowering hoist and vehicle in non-loaded condition.
Tightening Torque
(a): 85 Nm (8.5 kg-m, 61.5 ft. lbs.)
(b): 127 Nm (12.7 kg-m, 92.0 ft. lbs.)
4) As installation procedure hereafter is the same as that for coil spring, refer to Coil Spring.
NOTE: For any tightening torque other than those specified in text, refer to Specifications for that component.