Vitara JS (2Dr) 2WD L4-1.6L DOHC MFI (1999)
^
For 4WD vehicle install drive shaft bearing by using special tool.
Special Tool
(A):
09913-80112 Vehicle with G16 or J20 engine
Dimension "a":
1.75 - 2.50 mm (0.069 - 0.098 inch) Vehicle with G16 or J20 engine
^
When installing wheel spindle to knuckle, coat their mating surfaces with sealant.
"A": Sealant 99000-31110
^
For 4WD vehicle, also fill recess in wheel spindle with about 10g lithium grease.
"B": Grease 99000-25010
^
Tighten wheel spindle nut to specified torque.
Tightening Torque (a): 50 Nm (5.0 kg-m, 36.5 ft. lbs.)
^
For 4WD vehicle
Press-fitting inner oil seal.
Drive in inner oil seal until its end contacts stepped surface of knuckle using special tools.
Special Tool
(B): 09944: 66010
(C): 09924: 74510