Vitara JS (2Dr) 2WD L4-1.6L DOHC MFI (1999)
Suspension Strut / Shock Absorber: Service and Repair
Rear Shock Absorber
REAR
The shock absorber is non-adjustable, non-refillable, and cannot be disassembled. The only service the shock absorber requires is replacement when it
has lost its resistance, is damaged, or leaking fluid.
REMOVAL
1) Hoist vehicle and remove rear wheel.
2) Support rear axle housing by using floor jack to prevent it from lowering.
3) Remove lock nut (H25 vehicle) and absorber nut.
4) Remove lower mounting bolt.
5) Remove shock absorber
INSTALLATION
1) Install shock absorber. Refer to image for proper installing direction of lower mounting bolt.
2) Remove floor jack.
3) Lower hoist.