Vitara JS (2Dr) 2WD L4-1.6L DOHC MFI (1999)
1) Install lower rod to chassis frame and axle housing.
Nuts should not be tightened.
2) Remove floor jack from rear axle housing.
3) Install wheel and tighten wheel nuts to specified torque.
Tightening Torque for wheel nuts 95 Nm (9.5 kg-m, 69.0 ft. lbs.)
4) Lower hoist and with vehicle in non loaded condition, tighten front bolts and rear bolts and nuts of lower rod to specified torque.
Tightening Torque (a): 90 Nm (9.0 kg-m, 65.0 ft. lbs.)