Vitara JS (2Dr) 2WD L4-1.6L DOHC MFI (1999)
_2wd/l4-1.6l_dohc_mfi/Page-950001.png)
Extension Housing: Service and Repair
EXTENSION CASE OIL SEAL (2WD VEHICLE)
REMOVAL AND INSTALLATION
1) Lift vehicle horizontally.
2) Remove rear propeller shaft from extension case.
3) Pry shroud, felt and oil seal with flat-bladed tool.
4) Be sure to apply grease to oil seal lip. Using special tool and plastic hammer, press-fit new oil seal, felt and shroud up to position indicated in
figure.
"A": Grease 99000-25010
Special Tool (A): 09940-53111
5) Install rear propeller shaft.
