Vitara JS (2Dr) 2WD L4-1.6L DOHC MFI (1999)
_2wd/l4-1.6l_dohc_mfi/Page-1030003.png)
9) Break with a chisel the thin ground sensor rotor, and it can be removed (if equipped with ABS).
10) In order to remove the retainer ring from the shaft, grind with a grinder two parts of the bearing retainer ring as illustrated till it becomes thin.
CAUTION: Be careful not to grind too far not to damage the shaft.
11) Break with a chisel the thin ground retainer ring, and it can be removed.
12) Remove bearing from shaft by using hydraulic press.
13) Remove bearing retainer.
14) Remove stud bolt(s) by using hydraulic press.
