Vitara JS (4Dr) 2WD L4-2.0L (2000)
3. Disconnect coupler from ECT sensor.
4. Remove ECT sensor from intake manifold or water outlet cap.
Installation
Reverse removal procedure noting the following.
-
Clean mating surfaces of sensor and intake manifold.
-
Check O-ring for damage and replace if necessary.
-
Tighten ECT sensor to specified torque.
Tightening Torque
(a): 15 Nm (1.5 kg.m, 11.0 lb.ft)
-
Connect coupler to sensor securely.
-
Refill cooling system.