Vitara JX (2Dr) 4WD L4-1.6L DOHC MFI (1999)
1) Remove reservoir pin or connector screw and reservoir.
2) Remove circlip.
3) For vehicle with ABS
Pull out primary piston assembly straight so as not to cause any damage to inside of cylinder wall.
Pull out secondary piston assembly straight so as not to cause any damage to inside of cylinder wall and by tapping flange with a piece of wood or
something soft.
For vehicle without ABS
Remove piston stopper bolt. Then remove secondary piston by blowing compressed air into hole from which piston stopper bolt was removed.
Be cautious during removal as secondary piston jumps out.