Vitara JX (2Dr) 4WD L4-1.6L DOHC MFI (1999)
_4wd/l4-1.6l_dohc_mfi/Page-474003.png)
11. Remove heater core pipe clamps and grommet.
12. Pull out heater core from unit.
INSTALLATION
1. Install heater unit by reversing removal procedure, noting the following items.
^
When installing each part,be careful not to catch any cable or wiring harness.
^
When installing steering column assembly.
2. Install control cables .
3. Fill engine coolant to radiator.
4. Enable air bag system, if equipped.
5. Evacuate and charge system.
