Vitara JX (2Dr) 4WD L4-1.6L DOHC MFI (1999)
6) Disengage clutch (to lighten starting load on engine) for M/T model, and depress accelerator pedal all the way to make throttle valve full-open.
7) Crank engine with fully charged battery, and read the highest pressure on compression gauge.
NOTE: For measuring compression pressure, crank engine at least 250 r/min. by using fully charged battery.
8) Carry out steps 5) through 7) on each cylinder to obtain four readings.
9) After checking, install spark plugs and ignition coil assemblies and connect injector wire harness connector securely.