Vitara JX (2Dr) 4WD L4-1.6L DOHC MFI (1999)
_4wd/l4-1.6l_dohc_mfi/Page-241001.png)
Ignition Cable: Service and Repair
HIGH-TENSION CORD
REMOVAL
1. Remove high-tension cord from ignition coil assembly while gripping its cap.
2. Pull out high-tension cord from spark plug while gripping its cap.
CAUTION:
^
Removal of high-tension cords together with clamps will be recommended so as to damage their inside wire (resistive conductor).
^
For the same reason, pull out each connection by gripping cap portion.
INSTALLATION
1. Install high-tension cord to spark plug and ignition coil assembly while gripping its cap.
CAUTION:
^
Never attempt to use metal conductor high-tension cord(s) as replacing parts.
^
Insert each cap potion fully when installing high-tension cords.
