Suzuki Workshop Service and Repair Manuals

Throttle Cable/Linkage: Adjustments
Accelerator Cable Adjustment

1. With throttle valve closed, check accelerator pedal play which should be within following specification.

Pedal play "a": 2 - 7 mm (0.08 - 0.27 in.)

If measured value is out of specification, adjust it to specification with cable adjusting nut.

2. With accelerator pedal depressed fully, check clearance between throttle lever and lever stopper (throttle body) which should be within following

specification.

Clearance "b" : 0.5 - 2.0 mm (0.02 - 0.07 in.)
(With pedal depressed fully)

If measured value is out of specification, adjust it to specification by changing height of pedal stopper bolt.