suzuki Workshop Repair Guides

Suzuki Workshop Service and Repair Manuals

ABOUT US
Crankshaft Position Sensor (CKP) <--> [Crankshaft Position Sensor] > < Diagram Information and Instructions|Page 743

Vitara JX (2Dr) 4WD L4-1.6L DOHC MFI (1999)

Page 1
background image

Camshaft Position Sensor: Service and Repair

Removal

1. Disconnect negative cable from battery.
2. Disconnect connector from CMP sensor.
3. Remove CMP sensor from sensor case.

Installation

1. Check that O-ring is free from damage.
2. Check that CMP sensor and signal rotor tooth are free from any metal particles and damage.
3. Install CMP sensor to sensor case.

Tightening Torque (a): 9 Nm (0.9 kg-m, 6.5 ft. lbs.)

4. Connect connector to it securely.
5. Connect negative cable to battery.

Crankshaft Position Sensor (CKP) <--> [Crankshaft Position Sensor] > < Diagram Information and Instructions|Page 743