Vitara JX (2Dr) 4WD L4-1.6L DOHC MFI (1999)
2.
Remove the vent register noting the swivel bearing and swivel limit slot on the vent register and the swivel and limit pegs in the housing.
1 - Swivel Peg
2 - Limit Peg
3 - Swivel Bearing
4 - Limit Slot
2a.
Close-up of the swivel and limit pegs.
1 - Swivel Peg
2 - Limit Peg
3.
Remove the vent register swivel bearing.
NOTE: The bearing is directional.
3a.
Correct bearing direction.