suzuki Workshop Repair Guides

Suzuki Workshop Service and Repair Manuals

Steering Wheel|Testing and Inspection|Page 4339 > < A/C - Vent Registers Loose in Housing|Page 4335
Page 1
background image

Steering Wheel: Testing and Inspection

STEERING WHEEL CHECK 

Check steering wheel for looseness or rattle by trying to move it in its shaft direction and lateral direction.
If found defective, repair or replace.
Check steering wheel for play, holding car in straight forward condition on the ground and with engine stopped.
Steering wheel play "a": 0 - 30 mm (0 - 1.2 inch) 
If steering wheel play is not within specification, inspect as follows and replace if found defective.
^

Tie-rod end ball stud for wear

^

Lower ball joint for wear

^

Steering shaft joint for wear

^

Steering pinion or rack gear for wear or breakage

^

Each part for looseness

Steering Wheel|Testing and Inspection|Page 4339 > < A/C - Vent Registers Loose in Housing|Page 4335