Vitara JX (2Dr) 4WD L4-1.6L DOHC MFI (1999)
_4wd/l4-1.6l_dohc_mfi/Page-1275003.png)
3) Install control arm to chassis.
Tighten suspension arm nut to specified torque after lowering hoist and vehicle in non-loaded condition.
Tightening Torque
(a): 85 Nm (8.5 kg-m, 61.5 ft. lbs.)
(b): 127 Nm (12.7 kg-m, 92.0 ft. lbs.)
4) As installation procedure hereafter is the same as that for coil spring, refer to Coil Spring.
NOTE: For any tightening torque other than those specified in text, refer to Specifications for that component.
