Vitara JX (2Dr) 4WD L4-1.6L DOHC MFI (1999)
_4wd/l4-1.6l_dohc_mfi/Page-1303003.png)
12) Remove bearing circlip.
13) Using hydraulic press and drift, remove bearing race.
14) Remove hub bolts from hub.
INSTALLATION
1) Insert new stud in hub hole. Rotate stud slowly to assure serrations are aligned with those made by original bolt.
2) Using special tools, press-fit bearing outer race until its end contacts stepped surface of wheel hub.
Special Tool
(D): 09944-68210
(E): 09924-74510
