Vitara JX (4Dr) 4WD L4-2.0L (2000)
_4wd/l4-2.0l/Page-315002.png)
4. Tighten nuts in such order as indicated in figure a little at a time till they are tightened to specified torque.
^
Use new seal washers.
Tightening Torque (a): 11 Nm (1.1 kg-m, 8.0 ft. lbs.)
5. Install ignition coils and connect ignition coil couplers.
6. Install oil level gauge.
7. Connect breather hose and PCV hose to cylinder head cover.
8. Connect accelerator cable to clamp (For LH steering vehicle only).
