Vitara JX (4Dr) 4WD L4-2.0L (2000)
Shift Interlock Cable: Service and Repair
KEY INTERLOCK CABLE
NOTE: Don't bend interlock cable excessively when removing and installing it, or system will not operate correctly.
Removal
1. Disconnect negative (-) cable from battery.
2. If equipped with air bag system, disable air bag system. Refer to Air Bags and Seat Belts.
3. Remove steering column hole cover.
4. Tilt steering column if steering column is adjustable. If no adjustable, loosen steering column bolts.
5. Remove steering column cover.
6. Remove interlock cable clamp screw located at ignition switch assembly.
7. Remove disconnect interlock cable inner end. (Ignition switch side.)
8. With console box removed, take out interlock cable by loosening lock nuts.
9. Detach cable end from interlock cam (or key release cam) while pressing claws of interlock cam boss. At this time, be careful not to cause damage
to its claws.
Installation