Vitara JX (4Dr) 4WD L4-2.0L (2000)
_4wd/l4-2.0l/Page-768004.png)
Reverse removal procedure to install propeller shaft.
-
Use following specification to torque universal joint flange bolts (and center support bolts).
Tightening Torque
(a): 50 Nm (5.0 kg.m, 36.5 ft. lbs.)
-
When installing propeller shaft, align the match marks. Otherwise, vibration may occur during driving.
NOTE: If transfer oil was drained for front propeller shaft removal, pour specified gear oil into transfer case to specified level.
