X-90 (2WD) L4-1591cc 1.6L SOHC MFI (1997)
/l4-1591cc_1.6l_sohc_mfi/Page-943002.png)
8. Reverse procedure to assemble and install, noting the following:
a. If master cylinder and hydraulic modulator were separated, use new transfer tube assemblies and new O-rings.
b. Torque modulator assembly to master cylinder through bolts to 12 ft. lbs.
c. Torque modulator assembly to vacuum booster nuts to 20 ft. lbs.
d. Bleed hydraulic system as outlined in Brake System Bleed - ABS. See: Brake Bleeding/Service and Repair
Fig. 16 ABS Modulator Assembly Replacement
e. Torque modulator assembly, Fig. 16, mounting nuts to 6-8 ft. lbs.
f.
Torque hydraulic brake pipe fittings to 11-13 ft. lbs.
g. Bleed hydraulic system as outlined in Brake System Bleed - ABS. See: Brake Bleeding/Service and Repair
