X-90 (2WD) L4-1591cc 1.6L SOHC MFI (1997)
Vacuum Brake Booster: Adjustments
BOOSTER PUSH ROD CLEVIS ADJUSTMENT
Install push rod clevis so that measurement "a" is obtained and torque nut to specification.
Tightening Torque:
(a): 26 Nm (2.6 kg-m, 19.0 ft. lbs.)
Length:
"a": 126.1 -127.1 mm (4.96 - 5.00 inch)
INSPECTION /ADJUSTMENT OF CLEARANCE BETWEEN BOOSTER PISTON ROD AND MASTER CYLINDER PISTON
ADJUSTMENT
The length of booster piston rod is adjusted to provide specified clearance "a" between piston rod end and master cylinder piston.
-
Before measuring clearance, push piston rod several times so as to make sure reaction disc is in place.
-
Keep inside of booster at atmospheric pressure for measurement.
1) Set special tool (A) on master cylinder and push pin until contacts piston.
Special Tool
(A): 09950-96010