X-90 (2WD) L4-1591cc 1.6L SOHC MFI (1997)
/l4-1591cc_1.6l_sohc_mfi/Page-1095001.png)
Air Bag(s) Arming and Disarming: Service and Repair
Disabling Air Bag System
1. Turn steering wheel so that vehicle's wheels (front tires) are pointing straight ahead.
2. Turn ignition switch to "LOCK" position and remove key.
3. Remove "AIR BAG" fuse from the air bag fuse box.
4. Remove steering wheel side cap (left) and disconnect Yellow connector of driver air bag (inflator) module.
5. Pull out glove box while pushing its stopper from both right and left sides and disconnect Yellow connector of passenger air bag (inflator) module.
NOTE: With "AIR BAG" fuse removed and ignition switch ON, "AIR BAG" warning lamp will be ON.
This is normal operation and does not indicate a air bag system malfunction.
