X-90 (2WD) L4-1591cc 1.6L SOHC MFI (1997)
3.
Apply power steering fluid to the 0-rings and install them onto the pump body.
4.
Install the side plate to the pump body.
NOTE:
Carefully align the dowel pins on the side plate at a 45° angle, as shown in figure.
"a": 45°
5.
Apply power steering fluid to the siding surface of the rotor.
6.
Install the rotor onto the shaft.
7.
Install a new snap ring to the shaft, ensuring that it fits securely into the shaft groove.
NOTE:
Never reuse the removed snap ring.