X-90 (2WD) L4-1591cc 1.6L SOHC MFI (1997)
/l4-1591cc_1.6l_sohc_mfi/Page-784005.png)
7. Install rear axle shaft to rear axle housing and tighten bearing retainer nuts to specified torque.
NOTE: When installing rear axle shaft, be careful not to cause damage to oil seal lip in axle housing.
Tightening Torque (a): 23 Nm (17.0 ft. lbs.)
8. Refill rear axle (differential) housing with new specified gear oil.
9. Install brake drum. Refer to Brakes and Traction Control.
