X-90 (4WD) L4-1591cc 1.6L SOHC MFI (1998)
/l4-1591cc_1.6l_sohc_mfi/Page-728002.png)
4. Set release arm to release shaft by aligning punch marks. Then tighten bolt.
Tightening Torque
(a): 23 Nm (2.3 kg-m, 17.0 ft. lbs.)
5. Hook return spring.
6. Apply grease to release shaft arm, then set bearing.
7. Apply small amount of grease (about 0.1 g) to input shaft spline and front end as well.
CAUTION: DO NOT apply grease to sliding portion of release bearing with bearing retainer. Release bearing itself has been lubricated there.
"A": Grease 99000-25010
