XL-7 2WD V6-3.6L (2007)
7. Remove the protective cap from the compressor hose.
8. Install a new sealing washer to the compressor hose. Refer to [Sealing Washer Replacement].
9. Install the compressor hose to the condenser.
10. Install compressor hose nut to the condenser.
Tightening torque
Tighten the bolts to 20 N.m (15 lb.ft).
11. Install a new seal washer to the liquid line. Refer to [Sealing Washer Replacement].
12. Install the liquid line to the condenser.