XL-7 2WD V6-3.6L (2007)
Maintenance Reminder Control Module: Technical Service Bulletins
Instruments - Oil Life Monitor Resetting Procedure
XL7
Section Title: General Info
TSB No. TS 07 07037
Division: Automotive
Category: Technical
SUBJECT:
OIL LIFE RESET PROCEDURE DOES NOT FUNCTION AS EXPECTED
MODEL(S):
XL7 (JC636)
YEAR:
2007
CONDITION:
Oil Life Reset procedure in the Owners Manual and Service Manual does not work.
CAUSE:
Incorrect information was issued in the Owners Manual and Service Manual regarding Oil Life Resetting.
CORRECTION:
Use the procedure below to reset the oil life monitor.
Oil Life Reset Procedure
1.
With ignition key ON engine OFF, press and release the "Vehicle Information button until "%XX OIL LIFE REMAINING is displayed on the
"Driver Information Center" (DIC).
2.
Press and hold the "Set/Reset button for up to 5 seconds until the DIC shows "100% OIL LIFE REMAINING"
3.
If the number does not change to 100% repeat step 1 and 2.
Disclaimer