XL-7 2WD V6-3.6L (2007)
Body Control Module: Technical Service Bulletins
Computers and Controls - BCM Replacement Precautions
XL7
Section Title: Control Systems
TSB No. TS 04 04277
Division: Automotive
Category: Technical
SUBJECT:
BCM REPLACEMENT PRECAUTIONS
MODEL(S):
XL7 (JC636)
YEAR:
2007
CONDITION:
If the BCM connectors are not installed in the correct order damage to the BCM may occur. Other systems controlled by the BCM may also become
inoperative or intermittent.
APPROPRIATE ACTION:
Disconnect the battery negative terminal before removing any BCM connectors. First disconnect all BCM connectors except the light blue C-3 ground
connector. Then disconnect the light blue C-3 ground connector last. When installing the BCM connect all connectors before the light blue C-3 ground
connector. Reconnect the battery negative terminal after all connectors to the BCM are connected.
Disclaimer
