XL-7 2WD V6-3.6L (2007)
4. Once the front 2 locks are unlocked, lift the front of the dress cover and pull it forward.
NOTE: Always use care when removing a terminal position assurance (TPA) in order to avoid damaging it.
5. Remove the TPA by inserting a small flat-blade tool into the small slot on the TPA and pushing down until the TPA releases. Gently pry the TPA
out of the connector.
NOTE: Be careful not to angle or rock the J 38125-21 tool when inserting it into the connector or the tool may break.
