XL-7 2WD V6-3.6L (2007)
Windshield Moulding / Trim: Procedures
Stationary Window Reveal Molding Repair
Removal Procedure
WARNING: Refer to Glass and Sheet Metal Handling Caution.
NOTE: The window reveal molding fills the cavity between the body and window. If the reveal molding is stretched or damaged, it cannot be reused
and it must be replaced.
1. Lift up on the loose area of the reveal molding.
2. Clean the top edge of the window surface and the reveal molding with a 50/50 mixture of isopropyl alcohol and water by volume on a dampened
lint-free cloth.
Installation Procedure
WARNING: Refer to [Window Retention Caution].
1. Verify all primers and urethane adhesive are within expiration dates.
