XL-7 4WD V6-2.7L (2003)
Wheel Speed Sensor: Service and Repair
Type 2
Front
Front Wheel Speed Sensor Removal and Installation
Remove
Reference: Front Wheel Speed Sensor Output Voltage Inspection: Type 2
1) Disconnect negative cable from battery.
2) Hoist vehicle and remove wheel.
3) Disconnect front wheel speed sensor connector (1).
4) Remove harness clamp and sensor bolts (2) and remove front wheel speed sensor (1) from knuckle.
CAUTION:
^
Do not pull wire harness when removing front wheel speed sensor.
^
Do not cause damage to surface of front wheel speed sensor and do not allow dust, etc. to enter its installation hole.
