XL-7 4WD V6-2.7L (2003)
Lateral Accelerometer: Testing and Inspection
Type 1
Inspection
-
Check sensor bracket for bend.
-
Connect positive cable of 12 volt battery to "A" terminal of sensor and ground cable to "C" terminal. Then using voltmeter, check voltage between
"B" terminal and "C" terminal. If measured voltage is not as specified, replace sensor with bracket.
G sensor specification
When placed horizontally [A]: 2 - 3 V
When placed upright with arrow upward [B]: 3 - 4 V
When placed upright with arrow downward [C]: 1 - 2 V
