XL-7 4WD V6-2.7L (2003)
2. Install 1st timing chain crankshaft sprocket as shown in the figure.
Confirm that tooth for CKP sensor are free from metal particles and damage.
3. Check timing mark on RH bank intake camshaft as shown in the figure.
4. Install RH bank 1st timing chain intake camshaft sprocket (1) noting the following points.
^
The sprocket should be set in such way that its RH mark (4) can be seen.
^
Camshaft (2) should be held stationary by using a spanner at its hexagonal parts (3) as shown in the figure.
Tightening torque
RH bank 1st timing chain intake camshaft sprocket bolt (a): 80 Nm (8.0 kgf-m, 58.0 ft. lbs.)
5. Install timing chain tensioner (1) as shown in the figure.
Tightening torque
Timing chain tensioner nut (b): 27 Nm (2.7 kgf-m, 19.5 ft. lbs.)
