XL-7 4WD V6-2.7L (2003)
11. Turn crankshaft two rotations clockwise then align timing mark on crankshaft and timing mark on cylinder block as shown in figure
Check each other timing marks that align them shown in the figure.
12. Apply oil to timing chains, tensioner adjusters sprockets, and guides.
13. Install timing chain cover.
14. Install oil pan.
15. Install front differential.
16. Install P/S system.
17. Install cooling system.
18. Install intake manifold with throttle body.
19. Refill cooling system, P/S system, front differential and engine with each oil/fluid.
20. Check wheel alignment.
21. Verify that there is no fuel leakage, water leakage and oil leakage at each connection.
