XL-7 4WD V6-2.7L (2003)
1. Install magnet clutch coil (1).
NOTE: Protrusion on underside of magnet clutch coil and hole on compressor body assembly must match to stop movement of magnet clutch coil
and to locate lead wire correctly.
2. Install magnet clutch.
a. Set magnet clutch horizontally over clutch installation boss.
b. Place special tool (D) onto magnet clutch bearing, and then hit top of special tool by hammer.
Special Tool
(D): 09991-06510
c. Install new circlip.
3. Install armature plate.
4. Using special tool (A), tighten new armature plate bolt (1) to specified torque.
Tightening torque
Armature plate bolt (a): 13 N.m (1.3 kg.m, 9.0 lb.ft)
Special Tool
(A): 09991-06520
