XL-7 4WD V6-2.7L (2003)
4. Install the sensor nut and position the sensor body parallel to the inside wheel surface while torquing.
Tightening torque
Tighten the sensor nut to 7 N.m (62 lb in).
NOTE: Before installing the tire on the wheel, note the following items to avoid tire pressure sensor damage upon tire mounting:
-
Position the mounting/dismounting head 180 degrees from the valve stem.
-
Position the bead transition area 45 degrees counterclockwise of the valve stem.
-
Using the tire machine, rotate the tire/wheel assembly clockwise when transferring the tire bead to the inside of the wheel rim.
-
Repeat items for outer bead.
5. Install the tire on the wheel. Refer to [Tire Mounting and Dismounting].
6. Install the tire/wheel assembly on the vehicle. Refer to [Tire and Wheel Removal and Installation].
7. Lower the vehicle.
