XL-7 4WD V6-2.7L (2003)
Low Tire Pressure Indicator: Service and Repair
With Suzuki Scan Tool
1. Turn ignition switch to OFF position.
2. Connect SUZUKI scan tool to data link connector (DLC) located on underside of instrument panel at driver's seat side.
3. Turn ignition switch to ON position.
4. Select "MISC TEST" under TPMS of SUZUKI scan tool.
5. Active each tire pressure sensor according to the instructions displayed on SUZUKI scan tool within 90 seconds.
6. Turn ignition switch OFF position and then disconnect SUZUKI scan tool from DLC.