XL-7 4WD V6-2.7L (2003)
Safing Sensor: Testing and Inspection
WARNING: During service procedures, be very careful when handling a sensor.
-
Never strike or jar a sensor.
-
Under some circumstances, it could cause improper operation of the air bag system. A sensor and mounting bracket bolts must be
carefully torqued to assure proper operation.
CAUTION:
-
Never disassemble forward sensor.
-
Sensor should be replaced when it was dropped from a height of 90 cm (3 ft) or more.
-
Check sensor (1) and its bracket (2) for dents, cracks, deformation or rust.
-
Check sensor connector (sensor side and harness side) or lock mechanism for damage or crack.
-
Check connector terminals for bent, corrosion or rust.
-
Check sensor for resistance.
Forward sensor resistance: 738- 905 ohm
