XL-7 4WD V6-2.7L (2003)
Safing Sensor: Service and Repair
Forward Sensor
WARNING: During service procedures, be very careful when handling a sensor.
-
Never strike or jar a sensor.
-
Under some circumstances, it could cause improper operation of the air bag system. A sensor and mounting bracket bolts must be
carefully torqued to assure proper operation.
Removal
1. Disconnect negative cable at battery.
2. Disable air bag system referring to "Disabling Air Bag System".
3. Remove front grill referring to "Front Bumper Components".
4. Disconnect forward sensor connector sliding connector outer (1) as shown.
5. Remove forward sensor bolts (1), and forward sensor (2) from front panel (3).
Installation
CAUTION: Proper operation of forward sensor requires sensor be rigidly attached to vehicle structure and that the arrow on sensor bracket be pointing
toward the front of the vehicle.
1. Check that none of the following faulty conditions exists.
-
Bend or deformity of sensor bracket (1) and front panel.
-
Foreign matter on mating surface of sensor bracket (1) with sensor or excessive rust.