XL-7 4WD V6-2.7L (2003)
9. Install pulley (1) and tighten pulley nut with holding shaft by using hexagonal box wrench (2) to specified torque.
Tightening torque
Generator pulley nut (a): 111 N.m (11.1 kg-m, 80.5 lb-ft)
10. Install 4 rubber insulators (1).
11. Install rectifier (1).
CAUTION: When installing rectifier, check to confirm that stator leads have enough clearance with cooling fan blades.
Tightening torque
Rectifier screw (a): 2 N.m (0.2 kg-m, 1.5 lb-ft)
Rectifier "B" bolt (b): 3.9 N.m (0.39 kg-m, 3.0 lb-ft)
12. Install brush holder cover (1) to brush holder (2).
